The Mr. Heater - DeWalt (DXH185KT) thermostatically controlled forced air kerosene heater burns at 185 000 BTU/HR and can be used with kerosene diesel fuel oil or JP-8 fuels. With a included wheel kit and an 13.8 gallon tank you will get a full 10 hours of run time and the ability to heat up to approximately 4 700 square feet of space.
Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temperature
10"e; Flat free tires for long lasting maintenance free use
Time saving assembly no need to keep track of nuts and bolts when reassembling each season assembles in minutes
Recessed controls designed to reduce the risk of having the knobs or valves damaged on the jobsite
Continuous electronic ignition is always present as a source of ignition for unburned fuel reducing the ability for fuels to pool and collect in a dangerous manner
For use with kerosene 1 and 2 diesel 1 and 2 home heating oil and JP-8
Fuel Consumption 1.37 Gal./Hr.
Fuel Tank Capacity 13.4 Gal.
Full Tank Run Time 9.8 Hrs.
Heater Type: Kerosene
Heating Area: 4 700 Sq.Ft.
Output: 185 000 BTU/HR.
Output: 400 CFM
Power Requirements 120v 60Hz
Weight when full: 118 Lbs.
