Loading product detail...

Banks Power 42790 Engine Air Intake Deceleration Elbow

Name: Banks Power 42790 Engine Air Intake Deceleration Elbow
Brand: Banks Power
SKU: 801279427907
Price: 519.00 USD
Availability: InStock

$519.00

Qty.

Universal Fit

Get it by Tue, May 21

Shipping and Taxes calculated at checkout

SKU801279427907

BRANDBanks Power

Description

Monster-Ram Intake, Intake Manifold, Flows 1008 cfm, a 133% increase over stock 4-inch CNC machined inlet.
Four 1/8-inch NPT ports designed for optimal atomization of water-methanol or NOS.
Accommodates stock mounting points.
Optimizes air pressure and distribution into the intake manifold.
Includes proprietary #1 fuel line, 4 to 3.5-inch hump hose, and all necessary hardware.
Not emissions compliant. Puts inlet hose joint at the stock location.
This is for Pure Race Use Only.
Emissions equipment must be removed and requires a special ECM program available from others. Requires Banks Boost Tube Upgrade: 2007-09 (25990-Driver & Passenger tubes/25991-Driver Side only), 2010-12 (25998-Driver & Passenger tubes/25997-Driver Side only), 2013-18 (25992-Driver & Passenger tubes/25994-Driver Side only), Monster-Ram Intake System, 4-inch (natural) with Fuel Line, Monster-Ram Intake System, 4-inch (natural) with Fuel Line for 2007.5-2018 Dodge Ram 2500/3500 6.7L Cummins, Monster-Ram improves airflow from the intercooler.
Flows 1008 cfm (77.01 lbs/min) compared to Stock's measly 432 cfm (33.00 lbs/min).
Raises boost without increasing backpressure at the turbine.
Result: a more responsive, power efficient engine.
Up to four 1/8 inch NPT ports for flexibility! The top two NPT ports are positioned to allow for proper atomization directly into the center of the air mass while preventing wall wetting.
Accommodates stock mounting points including Temperature and Pressure sensors, wire harness, and dipstick tube. At Banks Power, just enough is never enough when it comes to engine airflow.
Maximum power, performance and efficiency are the ultimate goals, but to make it all happen the engine has to breathe freely and without needless restrictions.
Finding ways to pump your engine full of cooler, denser air has always been the key. Our High-Ram intakes have always whipped the competition.
Our new Monster-Ram flat-out destroys it.
Utilizing the latest in electronic computational fluid-dynamic technology, tested on the flow bench as well as on the dyno, and finally proven in the real world where the rubber meets the road, Monster-Ram is a beast that only Banks could have unleashed.
A simple, direct-replacement casting, Monster-Ram is instant power, performance, and acceleration gratification.
The factory inlet is cramped and angular compared to Banks' larger, streamlined cast-metal Monster-Ram., It's the perfect upgrade whether you're just starting out or working to build a serious, purpose-built race machine.
And with up to four ports for water/meth/propane/nitrous injection (or pressure/temp.
sensors), the sky's the limit for performance expandability.
Monster-Ram is CNC ported as well as the optional Banks Billet Intake Grid Heater Delete spacer. Improves airflow from the intercooler Raises boost without increasing turbine drive pressure Larger and less restrictive than stock intake Improves flow of oxygen-rich air into cylinders Quicker throttle response Outflows stock over 133% 4-inch CNC machined inlet Four 1/8-inch NPT ports (Top ports targeted for optimal atomization of Straight-Shot water-methanol) Accommodates stock mounting points Optimizes air pressure and distribution going into the intake manifold Custom fuel line accommodates proper airflow Includes fuel line, 4 to 3.5-inch hump hose, and all necessary hardware Natural bare finish Emissions Compliant: Race Only, Flows 1008 cfm, a 133% increase over stock, Engine Air Intake Deceleration Elbow.