Adhesion CharacteristicsRated from -40 to 300 Degrees F. When subjected to a 90 degree peel at a rate of 12 in/min (300 mm/min), the material has strength greater than 5 lbs (22.2 N) after the following: 5 min dwell, 2 weeks at 70 C, 2 weeks 100% relative humidity 37.8 C, 3 week environmental cycle
ColorElastomer - Dark Brown; Films - Release coated paper
Dead LoadThe material will show no evidence of saggin or pulling away from panel when a 34 gram weight is attached to (25 x 150 mm) strip with the assembly hanging vertically for 24 hours.
FlammabilityF/C MVSS 302
Flexibility/ConformabilityThe material will remain flexible and conformable at temperatures as low as -30 degrees C
Mold ResistanceNo odor or mold development was evident after 2 weeks at 100% relative humidity/37.8 C minimum
Performance RequirementsThe material remains tacky, shall not harden appreciably, no leach oils, and shall have good adhesion to fabrics and primed, lacquered, and trim adhesive sprayed surfaces. Tape strip will not stretch or have laminate separate upon removal of release paper.
RepositionabilityThe material can be repositioned and reused multiple times and still meet above adhesion characteristics.
SafetyQuiet Tape is not considered a hazardous material
Shelf Life12 months at 35 degrees C minimum
Solid Content98% minimum by weight
Specific Gravity.45 typical
Stain/Transfer ResistanceUnder normal operating conditions, this material will not stain or transfer when put in contact with other trim shop materials.
TitleQuiet Tape Shop Roll - One 1inx20'x1mm Single Side Foam Tape ea
Package Information- package Level GTIN Number: 00881101303005
- Quantity in Package: 1
- Height (Inch): 1
- Width (Inch): 6
- Length (Inch): 6
- Weight (Pounds Gross): 0.3